UGears: Aviator Console (726pc)

"Do you fly in your dreams? Do you like the feeling? Once again UGears makesthe dream come true reaching out to the sky with its first ever aircraft modelrepresented by two flying machines in one package. Introducing – The Aviatormodel. The model has three modules: the airplane, the helicopter and the flightcontrol tower. Choose between your aircraft, set one on the tower's bar and youare good to fly. As a beginner pilot, you might want to start with thehelicopter which is not as difficult to control as the airplane. Easier tomanipulate but no less exciting, your chopper has a cockpit with doors that openand shut, and three-blade main and tail rotors. The airplane has a highervelocity and requires a certain skill to operate. This module is based on thewire-braced biplane and has a 5-piston motor. To learn how to fly this waywardbird you may need several flight hours – but it is of course part of the fun!Besides, you would have already become acquainted with the basics if you startedwith the copter. However, your cockpit is the control tower, a sophisticateddevice with a high-performance motor that powers the rotation of the swash platewith the bar – with an aircraft on one side and balance weight on the other.The control tower is operated with two control bars: – the control columnregulates the roll and pitch of the flying machine; – and the Motorcontroller to adjust RPM (revolutions per minute) sets the speed of theaircraft. Fine tuning ensures the proper operation of the swash plate. When allthree units are assembled and you are ready to dive into the sky, it is time towind up the motor. Make sure you don't overextend the rubber bands in themotor – maximum winding must not exceed 25 half-turns. Hold on to thecontrol column while releasing the Motor controller's lock to launch yourmodel. Hang on to the wheel, throw caution to the wind, and fly – for the skyis the limit with your new Aviator model from UGears.

• Made of high quality plywood; assembly requires no glue or cutting
• Console size: 16,5 × 13,4 × 1­2,2 in (402 × 340 × 3­10mm);Plane size: 5,5 × 4,7 × 3,1 in (145 × 120 × 80mm); Helicopter size:8,7 × 7,1 × 3,5 in (220 × 185 × 90mm)
• Package size: 14,6 × 6,7 × 2 in (378 × 170 × 50mm)
• Number of components: 726
• Estimated time of assembly: 15 hours
• Level: Advanced"